Library
Classrooms
Curriculums
Articles
Pricing
Faculty
AudioPedia
Support
Login
Sign Up
Share
Go
or browse by category
Audio
Video
Graphics
Productivity
Web
Take a 25 question quiz to test and certify your knowledge of the tutorial-video course
iZotope Ozone 6.1 - Mastering Toolbox.
Get a mark of 80% or higher to pass this quiz!
1
Which modes of the Exciter module emulate vacuum tubes (valves)?
Tube and Triode
Tube and Warm
Tube and Dual Triode
Tube, Triode, and Dual Triode
2
When should you use the MBIT+ Dither module?
When converting high bit rate files to lower bit rates
Only if you use the 64-bit version of the program
When converting low bit rate files to high bit rates
When resampling from 96kHz to 44.1kHz
3
What advantage does the Digital mode of the Equalizer module offer?
Pure binary output
32-bit floating point output
Pure hexadecimal output
Linear phase response
4
If you're using a modern fast computer, what values can you use in the Buffer Size?
Higher values
Lower values
As high as possible without smoke pouring out of the computer
In multiples of 88
5
What does the L . R mode of the Equalizer offer?
Large and Reduced EQ settings
Separate EQ settings for the left and right channels
Mid/Side EQ
Stereo EQ
6
To process the left channel differently than the right, what mode should the Dynamic EQ module be set to?
L . R
M . S
Stereo
1 . 2
7
In a project that has multiple files loaded, how do you change the order of the files?
Click and drag the file tabs
Reimport the audio files in the desired order
Type in a different tab number
Drag the tabs from top to bottom
8
Where do the original audio files in an Ozone project get saved?
Project folder > Exported Audio Files folder
Project folder > Imported Audio Files folder
Ozone application folder > Imported Audio Files folder
My Documents > Ozone 6 > Exported Audio Files folder
9
When a band works as an expander, what happens to the Gain Reduction trace?
It is inverted
Works the same as when set to a compressor
It displays positive values
It is not visible
10
What icon is used on the The Auto Match Gain button?
An eye
An ear
A match
An ‘=‘ sign
11
After using the Learn feature, you can no longer adjust the crossover points. True or false?
True
False
12
The filter shapes of the Equalizer and Dynamic EQ module are identical. True or false?
False
True
13
How do you change a Dynamics band from a compressor to an expander?
Adjust the threshold until parenthesis appear
Adjust the knee until parenthesis appear
Adjust the Ratio until ‘Exp' is shown in the display
Adjust the Ratio until the parenthesis appear
14
Where on the spectrum do you click-and-roll your mouse wheel to adjust the amplitude scale?
Far left side of the spectrum
Lower center of the spectrum
Far right side of the spectrum
Center of the spectrum
15
How many Ozone modules can be used simultaneously?
Six
Seven, plus the Plug-in module
Six, plus the Plug-in module
Seven
16
When used in a host program, where should you place the Ozone plug-ins?
Sends
FX busses
Inputs
Inserts
17
As a rule of thumb, fast, up-tempo music can benefit from which Character settings?
Transparent and Slow
Transparent and Invisible
Fast and Smooth
Transparent and Opaque
18
What does a vertical line in the Polar Sample mode of the Vectorscope indicate?
Proper phase
Stereo audio
Mono audio
Out-of-phase audio
19
For a transistor type of excitement, which mode should you select?
Retro
Dual Triode
Triode
Warm
20
What modifier key is held down to enable Frequency Solo mode?
Alt-Control/Option-Command
Shift + Alt/Option
Control/Command
Alt/Option
21
How do you quickly restore all four bands of the Dynamics module?
Click the Reset button
Click the rubber band
Double-click any other band
Click the Default button
22
Where should you always place the Maximizer in the signal flow?
In front of the Plug-in Module
It doesn't matter
Last
After the Dynamic EQ module
23
When using M . S mode, the Exciter module must use the same type of exception for each channel. True or false?
True
False
24
To audition the opposite (antithesis) of what a node is doing, what feature do you enable?
Integer Mode
Inverse Mode
Antithesis Mode
Inversion Mode
25
Where do the Vectorscope and Phase Correlation meter ‘read' the audio?
Output stage of the Imager module
Output stage of the Ozone program
Before the Imager module
After the Limiter module
iZotope Ozone 6.1
Mastering Toolbox
You have answered
0
out of 25
questions.
You must
login
to take this quiz.
If you do not have an account, please
sign up
.
Get Your Grade
Cancel Quiz
Nice try! Unfortunately you didn't have enough correct answers to pass the quiz. No sweat! You can retake a quiz once per day.
-
-
You need 80% to pass this quiz
Retake Quiz
Back to the Course
View My Grades
Feedback
How are we doing?
We'd love your thoughts, feedback and questions regarding our new site. All feedback is appreciated!
We do not respond to this form! If you need support, please visit our
support page
.
Thank you for your input!
Your message has been successfully sent
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
copy
Make money when you share our links
Become an Ask.Video Affiliate!
The current affiliate rate is: 50%
Sign Up
Facebook
Twitter
Linkedin
Google+
Reddit
Pinterest
Classes Start Next Week!
Live 8-week Online Certification Classes for:
Logic Pro X
Learn More
Ableton Live
Learn More
Bitwig
Learn More