Library
Classrooms
Curriculums
Articles
Pricing
Faculty
AudioPedia
Support
Login
Sign Up
Share
1
Go
or browse by category
Audio
Video
Graphics
Productivity
Web
Take a 25 question quiz to test and certify your knowledge of the tutorial-video course
Kontakt 301 - Building Sampler Instruments.
Get a mark of 80% or higher to pass this quiz!
1
To fade in the sound of a group with the modulation wheel, what is the best method to use?
Set the group to start when CC1 is greater than 65
Use the amplifier to map the modulation wheel to volume
Have a friend turn up the amplifier volume when you raise the modulation wheel
Assign the group to an exclusive voice group
2
Which of these statements is true?
The Loop Edit button can be used to precisely adjust the start and end of the loop.
You can define up to 10 loops per waveform
If the Count parameter is set to 0, the selected area will not loop
The Tune parameter will transpose every iteration of a loop by the specified number of semitones
3
Locking a zone ______________.
Prevents any changes to the instrument
Automatically saves your instrument
Prevents any changes to the locked zone
Can only be done by the Kontakt system administrator
4
What is the root key?
C0
The key at which the original sample was recorded
The key where a sample is placed in the Mapping Editor
The lowest note in the zone range
5
If you want a group to trigger when the modulation wheel is raised at least halfway, ____________.
Connect the MIDI OUT of your controller to the MIDI IN port of your computer and hope for the best
In the group start options, set "Group Starts" to "on controller", "CC#" to 1, and "is between" to 65 and 127
In the group start options, set "Group Starts" to "on controller", "CC#" to 7, and "is between" to 65 and 127
In the group start options, set "Group Starts" to "on controller", "CC#" to 1, and "is between" to 1 and 65
6
If you want a loop to finish playing no matter when a key is released __________________.
use Until End mode
use One Shot mode
use Grid mode
use Until Release mode
7
Which one of these statements is true?
Zone envelopes must snap to the grid
You can have up to eight zone envelopes per waveform
A zone envelope loop must be the same length as the sample loop
Ctrl/Right-click can be used to add nodes in a zone envelope
8
Which of these functions can you NOT perform on a wave in Kontakt's Sample Editor?
Cropping the wave
Normalizing the wave
Reversing the wave
Compressing the wave
9
Which of these functions cannot be performed with the Monitor tool?
Viewing CPU and memory usage
Selecting multiple zones and groups
Create voice groups
Searching for specific zones and groups
10
Beatmachine works with ________________.
Pro Tools
All answers are correct
Logic
Live
11
Which one of these statements about Auto Map is false?
Auto Map can automatically set the pitch for a properly named sample
Auto Map can automatically set the velocity from a properly named sample
Auto Map can automatically set the group from a properly named sample
Auto Map can automatically set the pan location for a properly named sample
12
Which of these is the correct hierarchy of an instrument in KONTAKT?
Groups, Samples, Zones, Instruments, Multi
Samples, Groups, Zones, Instruments, Multi
Zones, Samples, Groups, Instruments, Multi
Samples, Zones, Groups, Instruments, Multi
13
To add a zone envelope for distortion, which of these steps does not belong?
Add a distortion effect
Click the "add: {control}" button on the Zone Envelopes tab. (For example: "add: Drive"
Touch a control in the distortion effect, such as Drive
Turn on Beatmachine
14
If you want a sample to play back at the same speed and pitch no matter where it is placed in the Mapping Editor then ________________.
Turn tracking on
Spread the sample across the entire range of the keyboard
Turn tracking off
Make sure it is a drum or percussion sample
15
An exclusive voice group is _________________.
a voice group that cuts off other voice groups assigned to the same exclusive voice group
a voice group that contains only samples of a similar type
a voice group that triggers randomly with other voice groups
a voice group that won't let any other voice groups join
16
You can create zone envelopes for which of these?
All three of those and much more
Pan
Volume
Send levels
17
The Drag MIDI to Host button performs which of the following functions?
Assigns loop slices to individual zones and creates a MIDI sequence to play them back in order
Imports a MIDI sequence from your DAW and places it in a unique zone
Assigns loop slices to individual zones and creates a MIDI sequence to play them back randomly
Slices the loop according the grid settings and copies the slices to the clipboard
18
Which of these formats cannot be used to create a sample in KONTAKT?
JPEG
AIFF
REX
WAV
19
What is the shortcut to open the Master Editor?
F2
F4
F1
Cmd/Ctrl-M
20
How can you create a new instrument in KONTAKT?
All answers are correct
Dragging an audio file from your hard disk or the KONTAKT browser
Choosing New Instrument from KONTAKT's file menu
Loading an existing instrument and saving it under a new name
21
How can you collapse or expand all groups in List View?
Click the plus/minus sign next to the group name with the Shift key
Click the plus/minus sign next to the group name with the Option/Alt key
You can't
Click the plus/minus sign next to the group name with the Cmd/Ctrl key
22
To alternate among three groups randomly ________________.
create a sequence to randomly play notes on the keyboard
set each group to "cycle round robin" and assign a position in the round robin chain
set each group to "cycle random"
assign each group to its own voice group
23
Which of these statements is correct?
Release triggers must be placed in a group with Release Trigger enabled
All answers are correct
Release triggers create the natural release sound of an instrument
Release triggers require separate release samples to be used
24
In order to use Auto Map, which of the following must be true?
All the selected samples must be named in a consistent matter
All the selected samples must begin with the group name
All the selected samples must be located in the same folder on your hard disk
All the selected samples must have five sections separated by dashes
25
Which of these statements is false?
You can drag multiple slices from the Wave Editor to the Mapping Editor to create a zone that plays back each slice
Slices dragged from the Wave Editor to the Mapping Editor must be played one at a time and in sequence
You can select non-contiguous slices in the Wave Editor by clicking each slice with the Cmd/Ctrl key
Beatmachine works best with percussive loops
Kontakt 301
Building Sampler Instruments
You have answered
0
out of 25
questions.
You must
login
to take this quiz.
If you do not have an account, please
sign up
.
Get Your Grade
Cancel Quiz
Nice try! Unfortunately you didn't have enough correct answers to pass the quiz. No sweat! You can retake a quiz once per day.
-
-
You need 80% to pass this quiz
Retake Quiz
Back to the Course
View My Grades
Feedback
How are we doing?
We'd love your thoughts, feedback and questions regarding our new site. All feedback is appreciated!
We do not respond to this form! If you need support, please visit our
support page
.
Thank you for your input!
Your message has been successfully sent
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
copy
Make money when you share our links
Become an Ask.Video Affiliate!
The current affiliate rate is: 50%
Sign Up
Facebook
Twitter
Linkedin
Google+
Reddit
Pinterest
Classes Start Next Week!
Live 8-week Online Certification Classes for:
Logic Pro X
Learn More
Ableton Live
Learn More
Bitwig
Learn More
